Panasonic SXKN2600 SXKN2400 User Guide - Page 110
Part Setting
View all Panasonic SXKN2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Part V Composer Part Setting You can make detailed settings for each part. 1. On the REALTIME RECORDING display, press the PART SETTING button. • The settings comprise 3 pages of the display. Use the PAGE buttons to switch pages. 2. Use the PART L and M buttons to select a part. 3. Use the ∧ and ∨ buttons to set the corre- sponding item. PITCH POINT: The pitch at which the pattern progression sound is lowered by one octave. • When the root note of the specified chord is higher than the set pitch point, the pitch of that part is automatically lowered by one octave, thus avoiding an unnaturally high accompaniment pitch. • This is effective only for the part for which the Melody group was selected in CHORD MODIFY CHANGE. SOUND: Use the panel buttons to select the sound. DIGI EFF: Set the DIGITAL EFFECT to on or off. • (SOUND) is the initialized setting of the sound. PAN: Adjust the stereo balance of each part (LEFT 64 - CENTER - RIGHT 63). • At "LEFT 64", the sound is all the way to the left, at "RIGHT 63" all the way to the right. The center point is CENTER. REV: Depth of the REVERB (0 to 127). CHO: Depth of the CHORUS (0 to 127). BEND RANGE: Adjust the range of pitch change when the PITCH BEND wheel is operated (0 to 12). EQ-Hi: Sound correction in the high range. • Use the FC ∧ and ∨ buttons to adjust the standard frequency. Use the GAIN ∧ and ∨ but- tons to set the ratio of change. EQ-Low: Sound correction in the low range. • Use the FC ∧ and ∨ buttons to adjust the standard frequency. Use the GAIN ∧ and ∨ but- tons to set the ratio of change. Composer BALANCE: Adjust the volume balance. 110 QQTG0692