Panasonic SXKN2600 SXKN2400 User Guide - Page 42
MULTI EFFECT, CONDUCTOR, PART SELECT, Type and parameter settings, EFFECT EDIT
View all Panasonic SXKN2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Sounds and effects Part I Sounds and effects MULTI EFFECT The MULTI EFFECT works like a studio effects processor, providing effects such as CHORUS, PHASER, DELAY and DISTORTION. 1. In the CONDUCTOR or PART SELECT sec- tion, turn on the part to which this effect will be applied. 2. Press the MULTI EFFECT button to turn it on. MULTI EFFECT Ⅲ EFFECT EDIT The effects can be edited and then stored in a memory. 1. Select an effect type to use as a base. 2. Press the EDIT button. • The display changes to the following. Ⅲ Type and parameter settings 1. Press and hold the MULTI EFFECT button for a few seconds. • The display changes to the following. 2. Use the L and M buttons to select an effect group. • The EFFECT MEMORY is for edited effects (see below). 3. Use the buttons to the right of the display to select the type. • If the types comprise more than one display "page," use the PAGE buttons to switch pages. • Press the VARI button to enable the variation effect. • This display can also be accessed from the REVERB & EFFECT MENU display. (Refer to page 155.) 3. Use the PARAMETER L and M buttons to select the parameter. 4. Use the VALUE ∧ and ∨ buttons to adjust the setting. • The parameters vary depending on the effect type selected as the base. • (V) is the abbreviation of VARIATION. 5. Press the WRITE button. 6. Press the EFFECT NAMING button and assign a name to the effect, if necessary. • Refer to page 65 for details about the NAMING procedure. 7. Use the EFFECT MEMORY L and M buttons to specify the location in which to store the edited effect. 8. Press the OK button. 42 QQTG0692