Panasonic SXKN2600 SXKN2400 User Guide - Page 184
MIDI Presets
View all Panasonic SXKN2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
MIDI Part XIII MIDI DRUM PATTERN OUTPUT ON: Data from the DRUMS part is transmitted. OFF: Data from the DRUMS part is not transmitted. AUTO PLAY CHORD OUTPUT ON: The data for the ACCOMP and BASS parts is transmitted. OFF: The data for the above parts is not transmitted. • MIDI channels should be assigned to the above parts before exchanging data. AUTO OCTAVE SHIFT OUTPUT ON: If the octave has been automatically changed, the data of the transposed notes is transmitted, depending on the sound. OFF: The note data of the played keys is transmitted. 3. Use the ∧ and ∨ buttons to select the setting. 4. Repeat steps 2 and 3 for each item as desired. MIDI Presets Establish the optimum settings depending on how this Keyboard is connected to other equipment, and on whether this Keyboard is used as the master or the slave. 1. On the MIDI MENU display, select MIDI PRE- SETS. • The display looks similar to the following. 2. Use the L and M buttons to select the con- nection setup. • The PAGE 1/4 display shows connection set- ups with this instrument as the SLAVE. And the PAGE 2/4 display shows connection setups with this instrument as the MASTER. • The MASTER is the instrument used to transmit data, and the SLAVE is the instrument used to receive the data. • Use the buttons below the display to select WITHOUT APC (the AUTO PLAY CHORD is not used) or WITH APC (the performance includes AUTO PLAY CHORD). 3. Press the OK button. • When the settings have been successfully stored, "COMPLETED!" appears on the display. Notice When an instrument such as an organ or accordion with separate or divided keyboards dedicated to melody and chords is used as the master instrument, if this instrument's split point is set to a note below the lowest note of the melody keyboard of the master instrument, it is possible to produce melody notes on multiple parts by this instrument's CONDUCTOR settings. • Assign the RIGHT 1 channel as the CHAN- NEL for the melody keyboard. Assign the CHORD channel (or if you also wish the played note to be produced, CHORD + LEFT) as the CHANNEL for the chord keyboard. • You will also have to specify CONDUCTOR as the RIGHT 1 INPUT for the INPUT/OUTPUT SETTING. 184 QQTG0692