Panasonic SXKN2600 SXKN2400 User Guide - Page 112

Part V Composer 5. Use the PHRS ∧ and ∨ buttons to specify the actual length of the produced sound for the desired legato or staccato effect. TENU (tenuto): Sound is produced for 95% of the note length. NORM (normal): 80% STAC (staccato): 50% CUTT (cutting): 25% 6. Specify the pitch and velocity of the note by playing the keyboard. • The dot on the display where the note is stored changes to a ∗ mark. • When recording chords, you can store multiple notes at one position. REST: To store a rest, after specifying the note LENGTH, press the REST button. • Positions at which nothing is stored are read as rests. ERS: If you make a mistake, move the cursor to the error, and after displaying the data you wish to erase, press the ERS button. 7. Repeat steps 2 through 6 to continue storing notes. • To record a different part, use the PART ∧ and ∨ buttons to select another part. • The NOTE, VELOCITY, LENGTH, CHORD MODIFY and CONTROL can be revised later. Press the OK button after the revision. • You can easily switch between the REALTIME mode and the STEP mode any time during recording. To return to the realtime recording display during the STEP RECORD mode, press the EXIT button. Measure Edit You can edit the recorded data one measure at a time. Select the function you wish to edit. 1. During recording, press the MEASURE EDIT button. • The display looks similar to the following. Composer 2. Select the function. 3. Follow the procedure to edit the function (see below). • Only the contents of the same pattern can be edited. 112 QQTG0692