Panasonic SXKN2600 SXKN2400 User Guide - Page 163
Filter Edit
View all Panasonic SXKN2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Part X Sound Edit PITCH ENVELOPE TOUCH & KEY FOLLOW Specify how the pitch envelope changes in relation to note pitch. 1. Use the PAGE buttons to view the 4/4 display. 2. Use the buttons to left of the display to select a tone. • Use the L and M buttons to select a setting item and then the ∧ and ∨ buttons to specify a selection. 3. Use the TOUCH ∧ and ∨ buttons to change the respective touch settings. • Use the TIME ∧ and ∨ buttons to specify the time change depending on touch. Use the LEVEL ∧ and ∨ buttons to specify the pitch change level depending on touch. Filter Edit • At a − setting, the softer the keys are pressed, the greater the change. At a + setting, the harder the keys are pressed, the greater the change. 4. Change the key follow settings for the ATTACK, DECAY and RELEASE. • Use the ∧ and ∨ buttons corresponding to the ENVELOPE KEY FOLLOW attributes to adjust the settings. Use the CENTER ∧ and ∨ buttons to select the center of the bend direction. Make major changes to the sound by eliminating specific frequency ranges. FILTER & EQUALIZER 1. On the SOUND EDIT menu, select FILTER. • The display looks similar to the following. HPF(6)+EQ (high-pass filter + equalizer) Signals lower than the cut-off frequency are cut. Normal sounds are sharpened. LPF24 (low-pass filter 24) A stronger low-pass filter than LPF+EQ. HPF24 (high-pass filter 24) A stronger high-pass filter than HPF+EQ. 2. Use the buttons to the left of the display to select a tone. • Use the L and M buttons to select a setting item and then the ∧ and ∨ buttons to specify a selection. 3. Use the MODE button to select the filter mode. LPF(6)+EQ (low-pass filter + equalizer) Signals higher than the cut-off frequency are cut. Normal sounds are softened. BPF (band-pass filter) Cuts off signals that are not within in the area between the two specified CUTOFF frequencies. • For this mode, adjust the settings on the EQUALIZER/FILTER side as well. THRU No filter effect is applied. Sound Edit 163 QQTG0692