Panasonic TCP42X5 TCP42X5 User Guide - Page 32

DIGITAL AUDIO OUT terminal You can enjoy your Home theater by connecting a Dolby Digital (5.1 channel) decoder and "Multi Channel" amplifier to the DIGITAL AUDIO OUT terminals. Caution ● Depending on your DVD player and DVD-Audio software the copyright protection function may operate and disable optical output. ● When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC channel is selected, the output will be PCM. ● When playing a movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from the DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in other formats, the output will be PCM. Closed Caption (CC) ● For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; characters might be cut off). ● The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) has the CC set to ON within the device itself. Check with your Cable or Satellite provider for instructions. The TV's CC button does not operate the Satellite or Cable box's CC function. ● If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC may overlap on the TV. ● If a digital program is being output in analog format, the CC data will also be output in analog format. ● If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor. 4:3 side bars Do not display a picture in 4:3 mode for an extended period, as this can cause "Image retention" to remain on either or both sides of the display field. To reduce the risk of such "Image retention", change the brightness of the side bars. See page 26 for more information ● The side bar may flash (alternate black/white) depending on the picture. Side Bar 4:3 Screen Display Image retention Input signal that can be displayed Applicable input signal for Component (Y, PB, PR), HDMI horizontal frequency (kHz) 525 (480)/60i 15.73 525 (480)/60p 31.47 750 (720)/60p 45.00 1,125 (1,080)/60i 33.75 1,125 (1,080)/60p 67.43 1,125 (1,080)/60p 67.50 1,125 (1,080)/24p* 26.97 1,125 (1,080)/24p* 27.00 Note ● Signals other than those shown above may not be displayed properly. ● The above signals are reformatted for optimal viewing on your display. vertical frequency (Hz) 59.94 59.94 59.94 59.94 59.94 60.00 23.98 24.00 (* HDMI only) Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we disclaim any liability or damage arising from operation and/or performance from usage of such other maker's peripheral devices. 32