Panasonic TH42PD25 TH37PD25 User Guide - Page 22

First Time Setup For your convenience, First Time Setup menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures displayed on-screen for setting up the features. You can also make the settings in Setup menu (see pages 36, 37). POWER SAP LIGHT TV VCR DVD DBS RCVR CBL AUX TV/VIDEO A -ANTENNA - B Input Setup Select the configuration of RF input depending on the signal source. First Time Setup Input Setup Setting Auto Scan Cable/Antenna ASPECT BBE E RE CH MUT CALL VOL OK VOL MENU CH EXIT 1 2 3 1 CH VOL OK VOL CH 2 CH VOL OK VOL CH Press to select Input Setup. Press to select Cable only, Cable/Antenna or Antenna only. Press to enter your selection. Press to start the Auto Scan. All available channels with a signal will be programmed into memory. Auto Scan This feature allows you to selectively auto scan channels. You can scan All, Analog only channels or Analog & Digital channels. 1 CH VOL OK VOL CH 2 CH VOL OK VOL Press to select Auto Scan. Press to enter the sub-menu field. Press to select the sub-menu. First Time Setup Input Setup Scan All Auto Scan Antenna (A) Analog Antenna (A) Analog & Digital Antenna (B) Analog Antenna (B) Analog & Digital Press to start Auto Scan. After Auto Scan is completed, the TV tunes to the first channel found during Auto Scan. CH To return to the previous menu MENU Press . To exit the menu screen EXIT Press . Notes: • If the EXIT button is pressed at anytime during Auto Scan, Auto Scan will be cancelled and the TV will return to the First Time Setup menu. • If a CableCARD is present during the First Time Setup and Antenna (A) is set to cable, Antenna (A) will not be scanned due to the CableCARD providing the channel map. 22