Pentax Program Plus Program Plus Manual - Page 19
loarzzoi
View all Pentax Program Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
LENS MOUNTING To mount or interchange Pentax K, KA and Kf mount lenses follow the steps below. (For screw mount lenses, see p. 55). • Remove the body mount cap and the rear lens cap. If the finder cap is still on the eyepiece, remove it. (For the finder cap, see p. 51). • Align the red dot on the camera body with the red dot on the lens (See It;11,C).). Seat the lens in the body mount and turn it clockwise until the lens locks with a click. When mounting the lens in dim light, method (0) is recommended. This method allows lens mounting by touch. Align the raised node on lens barrel with the lens release by touch. Then turn and lock as above. • To remove the lens cap, press in on the notches at both sides. • To remove the lens, press the lens release lever toward the camera body while turning the lens counter-clockwise. • After removing a lens from the camera body, replace the front and rear lens caps to protect the lens from dust and stains. 4111 _ 1;1111 .7/411111 loarzzoi t' 0, Wu Note: Don't damage or stain the electrical contact points on the mount face. When they become stained, wipe them with a clean, dry cloth. A 74101 PUN; I 'A. 15*