Pentax Program Plus Program Plus Manual - Page 40
Pentax Program Plus Manual
View all Pentax Program Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
SELECTING THE METERED MANUAL MODE ' *pi ?So -3 - "I 22 18 M °3 10 s 4 s I I I1 il l 1 4 t5 isI 3 I 22 22 16 11 8 5.6 4 2.8 • Set the shutter dial red -line index to "MAN." (manual) and select the desired shutter speed. The shutter speed will be displayed on LCDs inside the viewfinder. • Rotate lens aperture ring to an F value. Should the lens be locked as A (auto) and should "E" appear in the viewfinder, release it by depressing the aperture auto lock button. • Slightly depress the shutter release button, and you will see one of the following indications (+3, +2, +1, tO, -1, -2, or -3) displayed on the aperture value window in the viewfinder. These figures show the steps of over- or under-exposure 1EV value). + = over-exposure 1- 0 = correct exposure - = under-exposure Should the lighting condition go over the limit of three steps, the +3 or -3 indication flickers. tt m con1I0I 15 le 4 # 16 18 11 8 51 ; • 36 LOW Olt AUTO NAMI I NO6 1 , • For normal shooting, adjust the lens aperture so that correct exposure, indicated by ±0, is obtained. Should you select the lens aperture prior to the shutter speed, adjust the shutter speed to obtain the correct exposure. If you prefer over- or under-exposure, you can freely select any exposure applying the indication as a guidance. As soon as the meter switch is turned off by the built-in timer, the aperture indication goes out, but the shutter speed display remains on.