Pfaff 1540 Owner's Manual - Page 15
select - threading
View all Pfaff 1540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
it Operate your Pfaffselect Winding the bobbin from the spool holder Place the sewing thread on the spool holder (8). To guarantee free movement of the thread and to give additional hold to the thread spool, fit a spool cap corresponding to the size of the thread spool Threading Place the thread into guide A and pull it through opening B and to the right under the hook D. Wind the thread clockwise a r few times around in the bobbin. Switch on the main switch Hold the end of the thread firmly and press the foot control. The winding action will stop automatically as soon as the bobbin is full. Cut the thread, push the bobbin to the left and remove it. Don't forget: Turn the handwheel release disk (3) fully back again. Then turn the handwheel (4) towards you until it snaps into place.