Pfaff 1540 Owner's Manual - Page 79
Maintenance, troubleshooting
View all Pfaff 1540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Maintenance and troubleshooting Changing the sewing lamp Switch off the main switch Disconnect the mains plug and the foot control plug from the machine. • Take off the removable accessory tray (15). The sewing lamp is located inside the left side of the sewing machine Removal: Hold the sewing machine tightly. I • Push the lamp into its socket as far as it will go. • At the same time, turn the lamp a half turn anticlockwise and remove it. Insertion: • Insert the amp in the diagonal socket and turn it so that both stops of the lamp engage. • Now push the lamp fully into the socket and turn it clockwise so that it is held firmly. Note: The lamp changer (available as a special accessory) will make changing the lamp much easier. Important! The maximum permissible wattage of the lamp with a plug-in socket is 15 watts!