Pfaff 1540 Owner's Manual - Page 21

cannot, needle threader, needle, Model

Page 21 highlights

A B Operate your Pfaffselect Needle threader (Model 1540) To make threading the needle easier and quicker, you have been provided with the PFAFF needle threader (13). Lower the presser foot. Turn the handwheel until the needle is at its highest position. Place the needle thread under hook A and hold it taut. Move the needle threader fully downwards and turn it towards the needle so that the small hook B goes through the needle eye. Place the thread into the hook from below. Turn the needle threader towards the rear, releasing the thread carefully, and allow the threader to move upwards. You can now pull the thread through the needle eye. ) - L9 Threading the twin needle Insert the twin needle. Fit the second spool holder and place one spool of thread on each holder. In the left threading slot (11) you will find tension disk A. During threading, make sure that you pass one thread left and one thread right over tension disk A. Carry on threading in the usual way, but make sure the threads are not twisted with each other. Pull the threads right and left into thread guide (25) and thread the needles. Note: You cannot use the needle threader for a twin needle (Model 1540).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82

To
make
threading the
needle
easier
and
quicker,
you
have
been
provided
with
the
PFAFF
needle
threader
(13).
Lower
the
presser
foot.
Turn
the handwheel
until
the
needle
is
at
its
highest
position.
Place
the
needle thread under
hook
A
and
hold
it
taut.
Move
the
needle
threader
fully
downwards
and
turn
it
towards
the
needle
so
that
the
small
hook
B
goes
through the
needle
eye.
Place
the
thread
into
the
hook
from
below.
Turn
the
needle
threader
towards
the
rear,
releasing
the
thread
carefully,
and
allow
the
threader
to
move
upwards.
You
can
now
pull
the
thread
through
the
needle
Threading
the
twin
needle
Insert
the
twin
needle.
Fit
the
second
spool holder
and
place
one
spool
of
thread
on
each
holder.
In
the
left
threading
slot
(11)
you
will
find
tension
disk
A.
During
threading,
make
sure
that
you
pass
one
thread
left
and
one
thread
right
over
tension
disk
A.
Carry
on
threading
in
the
usual
way,
but
make
sure
the
threads
are
not
twisted
with
each
other.
Pull
the
threads
right
and
left
into
thread
guide
(25)
and
thread
the
needles.
Note:
You
cannot
use
the
needle threader
for
a
twin
needle
(Model
1540).
Operate
your Pfaff
select
Needle
threader
(Model
1540)
A
B
eye.
)
L9