Pfaff 1540 Owner's Manual - Page 20
Operate, Jfc4ff, select
View all Pfaff 1540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
__ Operate YDUY Jfc4ffselect -IE Threading the needle thread Switch off the main switch Raise the presser foot lifter (19) and turn the handwheel until the take-up lever (9) has moved to the top. Place the thread on the spool holder (8) and fit the corresponding spool cap. Now, using both hands, pull the thread into guide A and under thread guide hook D. Pass the thread through the lefthand threading slot (11) and downwards. Pull the thread around stop E into the righthand threading slot and upwards to the take-up lever (9). The thread must be pulled into the take up lever (9) from left to right and downwards again in the righthand threading slot. Finally, pass the thread from the side behind one of the two thread guides (25). To thread the needle, place the thread from front to back through the needle eye. To thread the needle using the needle threader (Model 1540>, please refer to the next page. p I