Pfaff ClassicStyle 1525 Owner's Manual - Page 21

Needle threader Model 1546, Threading the twin needle

Get Pfaff ClassicStyle 1525 PDF manuals and user guides View all Pfaff ClassicStyle 1525 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

A B Needle threader (Model 1546) To make threading the needle easier and quicker, use the PFAFF needle threader (13). Lower the presser foot. Turn the handwheel until the needle is at its highest position. Place the needle thread under hook A and hold it taut. Move the needle threader fully downwards and turn it towards the needle so that the small hook B goes through the needle eye. Place the thread into the hook from below. Turn the needle threader towards the rear, releasing the thread carefully, and allow the threader to move upwards. You can now pull the thread through the needle eye. Operate your Pfaff select Threading the twin needle Insert the twin needle. Fit the second spool holder and place one C spool of thread on each holder. In the left threading slot (11) you will Ànd tension disk C. During threading, make sure that you pass one thread left and one thread right over tension disk C. Carry on threading in the usual way, but make sure the threads are not twisted with each other. Pull the threads right and left into thread guide (24) and thread the needles. Note: You cannot use the needle threader for a twin needle. 1:11 1:11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
1:11
C
A
B
Operate your Pfaff select
Needle threader (Model 1546)
To make threading the needle easier and
quicker, use the PFAFF needle threader
(13). Lower the presser foot. Turn the
handwheel until the needle is at its
highest position. Place the needle thread
under hook A and hold it taut. Move the
needle threader fully downwards and
turn it towards the needle so that the
small hook B goes through the needle
eye. Place the thread into the hook from
below.
Turn the needle threader towards the
rear, releasing the thread carefully, and
allow the threader to move upwards.
You can now pull the thread through the
needle eye.
Threading the twin needle
Insert the twin needle.
Fit the second spool holder and place one
spool of thread on each holder.
In the left threading slot (11) you will
À
nd
tension disk C. During threading, make
sure that you pass one thread left and one
thread right over tension disk C.
Carry on threading in the usual way, but
make sure the threads are not twisted
with each other.
Pull the threads right and left into thread
guide (24) and thread the needles.
Note:
You cannot use the needle threader for
a twin needle.