Pfaff ClassicStyle 1525 Owner's Manual - Page 25

Changing the needle, Setting the needle thread tension, Dropping the feed dog

Get Pfaff ClassicStyle 1525 PDF manuals and user guides View all Pfaff ClassicStyle 1525 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Changing the needle A Switch off the main switch. To remove: Lower the presser foot and move the needle to its highest point. Now loosen the needle screw (18) and pull the needle down. To insert: The Áat side A of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it goes. Hold the needle and tighten the needle screw (18) Àrmly. Setting the needle thread tension Set the required needle thread tension B (10) with the help of the mark B. The normal setting for sewing is 4 to 5. For free-motion sewing, darning and buttonhole set the tension between 2 and 3. Operate your Pfaff select Dropping the feed dog For certain sewing work, e.g. darning or free-motion sewing the feed dog has to be dropped. To do this, open the bobbin case/hook cover and move slide C fully to the right. Now the feed dog is dropped. C 1:15 1:15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
1:15
C
B
A
Operate your Pfaff select
Changing the needle
Switch off the main switch.
To remove:
Lower the presser foot
and move the needle to its highest
point. Now loosen the needle
screw (18) and pull the needle
down.
To insert:
The
Á
at side A of the
needle must face to the rear.
Lower the presser foot and insert
the needle, pushing it up as far
as it goes. Hold the needle and
tighten the needle screw (18)
À
rmly.
Setting the needle thread tension
Set the required needle thread tension
(10) with the help of the mark B.
The normal setting for sewing is 4 to 5.
For free-motion sewing, darning and
buttonhole set the tension between 2 and
3.
Dropping the feed dog
For certain sewing work, e.g. darning or
free-motion sewing the feed dog has to be
dropped.
To do this, open the bobbin case/hook
cover and move slide C fully to the right.
Now the feed dog is dropped.