Pfaff hobby 1142 Owner's Manual - Page 17

Extra spool pin

Get Pfaff hobby 1142 PDF manuals and user guides View all Pfaff hobby 1142 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Operate your hobby 1142 1:7 Thread through the hole in the bobbin (D) D from the inside to the outside as shown in the picture. Place the bobbin on the bobbin winder spindle with the free end of the thread at the top. Push the bobbin to the right. Note: The bobbin can only be wound when it is moved fully to the right. Do not move the bobbin winder spindle while the machine is running. Hold the end of the thread Àrmly and press the foot control. Stop the machine when the bobbin has made several turns, and cut the free thread end close to the bobbin. Press the foot control again. When the bobbin is fully wound, it will stop automatically. Push the bobbin to the left, remove it and cut the thread. Push in the handwheel to engage the clutch. Extra spool pin If the machine is already threaded, you can easily wind thread from the second spool pin without unthreading the machine. Insert the extra spool pin into the hole (E). Place the felt and a spool on the pin. E Thread the machine for winding in the same way as before.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
1:7
D
E
Operate your hobby 1142
Thread through the hole in the bobbin (D)
from the inside to the outside as shown in
the picture.
Place the bobbin on the bobbin winder
spindle with the free end of the thread at
the top.
Push the bobbin to the right.
Note
: The bobbin can only be wound when it
is moved fully to the right. Do not move the
bobbin winder spindle while the machine is
running.
Hold the end of the thread
À
rmly and
press the foot control. Stop the machine
when the bobbin has made several turns,
and cut the free thread end close to the
bobbin.
Press the foot control again. When
the bobbin is fully wound, it will stop
automatically.
Push the bobbin to the left, remove it and
cut the thread.
Push in the handwheel to engage the
clutch.
Extra spool pin
If the machine is already threaded, you
can easily wind thread from the second
spool pin without unthreading the
machine.
Insert the extra spool pin into the hole (E).
Place the felt and a spool on the pin.
Thread the machine for winding in the
same way as before.