Pfaff select 150 Owner's Manual - Page 36

Beading foot, 4 mm

Get Pfaff select 150 PDF manuals and user guides View all Pfaff select 150 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

2. Attach the 7/9 Hole Cord Foot. 3. Choose a decorative stitch to sew over the 7 or 9 cords. TIP: Pearl thread or embroidery twist works well. Beading foot, 4 mm For that extra touch, highlight any sewing project with strings of pearls or beads. The beads will run smoothly through the groove under the foot while you sew for beautiful results. 1. Snap on the Beading Foot. 2. Thread your machine with invisible thread in the needle and regular sewing thread that matches the fabric in the bobbin. 3. Select either the zigzag stitch or the blindhem stitch with the following settings: Zigzag stitch: length 3.5, width 4.0 Blindhem stitch: length 1.0, width 4.5 4. Lower the needle thread tension to achieve a beautiful stitch. 5. Place stabilizer under the fabric and position both under the foot. 6. Place the bead string under the foot in the groove on the underside of the beading foot. Lower the presser foot. 7. Turn the hand wheel to create manual stitches to set the beads in place. 8. Stitch slowly. Note: Stitch the bead string to a scrap piece of fabric Àrst to test thread tension, stitch length and stitch width according to the beads and the fabric. Make adjustments as needed. 36 Utility stitches and practical sewing

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
36
Utility stitches and practical sewing
2.
Attach the 7/9 Hole Cord Foot.
3.
Choose a decorative stitch to sew over the
7 or 9 cords.
TIP: Pearl thread or embroidery twist works well.
Beading foot, 4 mm
For that extra touch, highlight any sewing
project with strings of pearls or beads. The
beads will run smoothly through the groove
under the foot while you sew for beautiful
results.
1.
Snap on the Beading Foot.
2.
Thread your machine with invisible
thread in the needle and regular sewing
thread that matches the fabric in the
bobbin.
3.
Select either the zigzag stitch or the
blindhem stitch with the following
settings:
Zigzag stitch:
length 3.5, width 4.0
Blindhem stitch:
length 1.0, width 4.5
4.
Lower the needle thread tension to
achieve a beautiful stitch.
5.
Place stabilizer under the fabric and
position both under the foot.
6.
Place the bead string under the foot in the
groove on the underside of the beading
foot. Lower the presser foot.
7.
Turn the hand wheel to create manual
stitches to set the beads in place.
8.
Stitch slowly.
Note: Stitch the bead string to a scrap piece of
fabric
À
rst to test thread tension, stitch length and
stitch width according to the beads and the fabric.
Make adjustments as needed.