Pfaff select 150 Owner's Manual - Page 38

Decorative trim foot

Get Pfaff select 150 PDF manuals and user guides View all Pfaff select 150 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Decorative trim foot Embellish your project with different types of trims by using the Decorative trim foot. This foot will easily guide the trims through the opening at the front and through the groove under the presser foot. 1. Thread your machine with a regular sewing thread or decorative thread on top and regular sewing thread in the bobbin. 2. Select a straight stitch, zigzag stitch or decorative stitch. Tip: For the 6mm wide trims, you can also use a 6mm twin needle. Select a straight stitch and it will sew at the edges of the trim. 3. Place the trim in the presser foot as the picture shows. 4. Snap on the Decorative Trim Foot. 5. Engage the IDT™ system. 6. Sew carefully, not too fast. (You might need stabilizer underneath the fabric) 7. The best result is achieved if you use Áat trims, such as silk, velvet, satin or cotton ribbons. 3 mm (1/8") 6 mm (1/4") 12 mm (1/2") 38 Utility stitches and practical sewing

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
38
3 mm
(1/8")
12 mm
(1/2")
6 mm
(1/4")
Utility stitches and practical sewing
Decorative trim foot
Embellish your project with different
types of trims by using the Decorative
trim foot. This foot will easily guide the
trims through the opening at the front and
through the groove under the presser foot.
1.
Thread your machine with a regular
sewing thread or decorative thread on
top and regular sewing thread in the
bobbin.
2.
Select a straight stitch, zigzag stitch or
decorative stitch.
Tip: For the 6mm wide trims, you can also use
a 6mm twin needle. Select a straight stitch and
it will sew at the edges of the trim.
3.
Place the trim in the presser foot as the
picture shows.
4.
Snap on the Decorative Trim Foot.
5.
Engage the
IDT™
system.
6.
Sew carefully, not too fast. (You might
need stabilizer underneath the fabric)
7.
The best result is achieved if you use
Á
at trims, such as silk, velvet, satin or
cotton ribbons.