Pfaff select 150 Owner's Manual - Page 39
Changing the needle plate, Cleaning and oiling
View all Pfaff select 150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Changing the needle plate Switch off the main switch (1) It is very important to clean your sewing machine, because it will reward you with a longer service life. The more often you use the machine, the more care it needs. Removal: • Raise the presser foot and remove the removable accessory tray. • Push the point of a small screwdriver into the opening between needle plate and sewing machine. • Twist it lightly to the right and the needle plate will snap half way out of its mounting. Now push the screwdriver into the left opening and take the needle plate out. Replacing: • Place the needle plate on Áat at the back and push it down with both hands at the front until you hear it snap in place. Before you start sewing, check that the needle plate is lying Áat. Cleaning and oiling Switch off the main switch (1) • Remove the needle plate and lower the feed dogs. • Clean the feed dogs and hook area with the brush. • Apply a drop of oil (every 15 to 20 hours of operation) to the hook as shown in the illustration. Note: Use good quality sewing machine oil only! Maintenance and trouble-shooting 39