Philips 27PT543S User manual - Page 11

USING THE CVI (COMPONENT VIDEO INPUT) JACKS Component Video inputs provide for the highest possible color and picture resolution in the playback of digital signal source material, such as with DVD players. The color difference signals (Pb, Pr) and the luminance (Y) signal are connected and received separately, which allows for improved color bandwidth information (not possible when using composite video or S-Video connections). 1 Connect the Component (Y, Pb, Pr) Video OUT jacks from the DVD player (or similar device) to the (Y, Pb, Pr) in(put) jacks on the TV. When using the Component Video Inputs, it is best not to connect a signal to the AV1 in Video Jack. 2 Connect the red and white AUDIO CABLES to the Audio (left and right) CVI output jacks on the rear of the accesso- ry device to the Audio (L and R) AV1 in Input Jacks on the TV. 3 Turn the TV and the DVD (or digital accessory device) ON. 4 Press the AV button to scroll the available channels until CVI appears in the upper left corner of the TV screen. 5 Insert a DVD disc into the DVD player and press the PLAY ᮣ button on the DVD Player. 4 The CVI connection will be dominate over the AV1 in Video Input. When a Component Video Device is connected as described, it is best not to have a video signal connected to the AV1 in Video Input jack. BACK OF TV 1 Monitor out AV1 in VIDEO Y L/Mono AUDIO Pb 2 AV2 in R Pr COMPONENT VIDEO INPUT S-VIDEO COMPONENT VIDEO CABLES (Green, Blue, Red) AUDIO CABLES (RED/WHITE) COMP VIDEO Y Pb Pr S-VIDEO VIDEO AUDIO R OUT OUT OUT L HELPFUL HINT The description for the component video connectors may differ depending on the DVD player or accessory digital source equipment used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb). Although abbreviations and terms may vary, the letters b and r stand for the blue and red color component signal connectors, and Y indicates the luminance signal. Refer to your DVD or digital accessory owner's manual for definitions and connection details. c CHECK IT OUT Repeatedly pressing the AV button on the remote control will toggle the picture source from the current channel, then AV1 (or CVI), AV2, SVHS, Front, or currect channel. Note: The Component Video and Audio cables needed for this connection are not supplied with your TV. Please contact your dealer or Philips at 800-531-0039 for information about purchasing the needed cables. VOL 11 3 5 ACCESSORY DEVICE EQUIPPED WITH CONPONENT VIDEO OUTPUTS.