Philips 32PFL3403D User manual - Page 11

ENGLISH 4.5 Connect the AC power cord BB Warning Verify that your voltage corresponds with the voltage printed at the back of the TV. Do not insert the AC power cord if the voltage is different. To connect the AC power cord 4.7 Switch on the TV Before you switch on the TV, check that the mains cord is properly connected. Press POWER button at the side of the TV, or press power button on the remote control. The TV normally takes 10-15 seconds to start up and the following screen appears the first time you turn on the TV. FRANÇAISE ESPAÑOL BLE Thank you for your purchase of this TV. Please proceed with the following steps to set-up your TV. For the BEST possible picture performance, contact your local Cable / Satellite signal provider for High Definition signal options available in your area. Next Press the GREEN Next button on your remote to proceed. 1. Locate the power connector at the back of the TV. The location of the power connector varies according to TV model. Follow the on-screen instructions to select your language and complete your TV setup. Installation takes approximately 10 minutes. 2. Insert the AC power cord fully into the TV DD Note power connector. If you connect your TV to a cable receiver box or TE 3. Connect the AC power cord plug to the power outlet. Ensuring that the cord is tightly secured at both ends. satellite set-top box, you do not need to install channels. Press the red button on the remote control to exit the channel installation stage of the setup. 4.6 Manage cables Route your AC power cord, antenna AV1 HDMI 1 HDMI 2 / PC IN cable and all other device cables through theAV2 cable 75Ω tie at the back of the TV. It helps keep your cables tidy and easily manageable. CABLE AV 1 HDMI 1 HDMI 2 / PC IN 75 Ω AV 2 EN-10