Philips DVD590M User manual - Page 14

DVD590M_17x 6/11/2003 1:42 PM Page 14 14 Hookups (cont'd) Connecting to a TV and a Digital Stereo (Receiver has PCM, Dolby DigitalTM, MPEG2, or Digital Theater System) Back of TV (example only) Stereo Receiver (example only) VIDEO IN VIDEO IN 1 Pb/Cb Y MAINS 3 Pr/Cr S-VIDEO VIDEO DIGITAL AUDIO OUTPUT L COAXIAL 2 COAXIAL DIGITAL AUDIO IN 1 Connect the supplied yellow video cable to the Player's yellow VIDEO jack and to the corresponding VIDEO IN jack on your TV. 2 Connect the Player's COAXIAL Digital Audio Output jack to the COAXIAL Digital Audio In jack on your Stereo. A digital audio cable is not supplied. 3 Connect the supplied power cord to the MAINS ~ (AC Power) jack on the Player. Connect the AC plug to a power outlet. 4 Press y on the Player or its remote to turn on the Player. Turn on the TV and set it to the correct Video In channel. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1 or EXT2, etc.These channels often are near channel zero (0). See your TV owner's manual for details. Or, change channels at the TV until you see the Player's blue background screen on the TV. Turn on the Stereo and set it to the correct Digital Audio In channel or sound source. Refer to the Stereo's manual. 5 Set TV OUTPUT accordingly. Details are on page 33. Set DIGITAL OUTPUT accordingly. Details are on page 36. R Helpful Hints • You will have Multichannel sound with this connection only if your Stereo has a digital multichannel decoder. • Your Stereo must support MPEG2, Dolby DigitalTM or Digital Theater System (DTS). Check the Stereo's manual. • You may use S-Video or Component Video connections instead for higher picture quality.These options must be available on your TV. Details are on pages 9-12.