Philips DVP3050V User manual - Page 29

H9820UD_IB_EN_1_0210 2/14/05 11:16 AM Page 29 English Timer Recording (cont'd) 29 9 ● If you are recording from other equipment, select L1 or L2.To determine L1 or L2, refer to the Helpful Hints. ● If you are using a Cable Box/Satellite Receiver, select the Cable Box/Satellite Receiver output channel (03 or 04). Then, at the Cable Box/Satellite Receiver, select the channel you want to record. Leave the Cable Box/Satellite Receiver on for the timer recording. Details are on page 10. Press K or L to select a recording tape speed. The arrow will appear beside your choice.The selected speed will flash beside REC SPEED. Details about tape speed are on page 60. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 0 5 / 0 4 WED START TIME 0 7 : 3 0 P M END TIME 0 8 : 3 0 P M CHANNEL 16 REC SPEED S P B SP SLP 10 Press CLEAR/RESET to store the timer recording. 11 STANDBY-ON SEARCH MODE DISPLAY REPEAT REPEAT AUDIO A-B SUBTITLE ZOOM ANGLE SKIP / CH RETURN TITLE CLEAR/RESET SLOW VCR DISC/VCR MENU VCR/TV DVD SYSTEM MENU OK STOP PLAY PAUSE TIMER SET MARKER RECORD SPEED 1 2 3 4567 10 9 11 Press TIMER SET. The DVD/VCR will turn off and " " will appear in the display panel. In some cases, the DVD/VCR will switch to DVD mode instead.You may use the DVD Player during a timer recording. If you want to use the VCR until time for the recording, don't press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won't be using the VCR anymore (until after the recording). When " " appears, you cannot put the DVD/VCR in VCR mode by pressing VCR or SOURCE.You must first press TIMER SET to cancel the timer recording temporarily.Then, you can use the VCR features again. When a timer recording ends The DVD/VCR will turn off and " " on the DVD/VCR's display panel will flash indicating that the recording is complete. Or it may switch to DVD mode automatically. Press TIMER SETto use the DVD/VCR as usual. Cancelling Timer Recordings 1 Press VCR, then press DISC/VCR MENU so MENU appears. 2 Press K or L to select TIMER PROGRAMMING, then press B. 3 Press K or L to find the program you want to cancel. 4 While the program number is flashing, press s to clear all the information for that program. 5 Press CLEAR/RESET to remove the menu. 8 9 0 +10 Helpful Hints • To stop a started timer recording, press STOP/EJECT CA (VCR) on the front of the DVD/VCR. (You cannot stop a started timer recording with STOP C on the remote.) More Helpful Hints are on page 62. • To change incorrect information, press s or B to choose the item you want to change. Press K or L to adjust the information. • While a timer recording is set and " " is on, pressing STOP/EJECT C A (VCR) will turn on the DVD/VCR and/or cancel the timer recording.The " " will disappear. Press STOP/EJECT C A (VCR) again to remove the tape. Insert a tape and press TIMER SET to reset the timer recording. • If there is no tape in the VCR when you press TIMER SET, " " will flash. Insert a tape. • If one or more Timer recordings are on standby when one timer recording ends, the DVD/VCR will turn off automatically and " " will appear on the DVD/VCR's display panel indicating that it is now ready for another timer recording.