Philips DVP3050V User manual - Page 54

H9820UD_IB_EN_2_0214 2/14/05 3:58 PM Page 54 English 54 Display (cont'd) Instructions continued from previous page ● If you selected STILL MODE, press K or L to select a setting, then press OK. This determines the quality of an image in still mode.AUTO is the default setting. If you select FIELD, still images will be stabilized but coarse due to the small amount of data. If you select FRAME, the images will be highly defined due to the simultaneous output of two fields. DISPLAY STILL MODE AUTO FIELD FRAME OK STILL MODE 6 Press SYSTEM/MENU to remove the menu. Progressive Scan You may adjust the Progressive Scan compatibility. 1 Follow the steps 1-4 in the Display setup on page 53. 2 ● Press K or L to select PROGRESSIVE, then press OK repeatedly to turn PROGRESSIVE ON or OFF. The default setting is OFF. Choose ON if your TV has Progressive Scan and if the TV is connected to the Player's COMPONENT VIDEO OUT jacks. Choose OFF otherwise. 3 Press SYSTEM/MENU to remove the menu. ● If PROGRESSIVE is ON, this message appears: STANDBY-ON SEARCH MODE DISPLAY REPEAT REPEAT AUDIO A-B SUBTITLE ZOOM ANGLE SKIP / CH RETURN TITLE CLEAR/RESET SLOW VCR DISC/VCR MENU VCR/TV DVD SYSTEM MENU OK 6 STANDBY-ON SEARCH MODE DISPLAY REPEAT REPEAT AUDIO A-B SUBTITLE ZOOM ANGLE SKIP / CH RETURN TITLE CLEAR/RESET SLOW VCR DISC/VCR MENU VCR/TV DVD SYSTEM MENU OK STOP PLAY PAUSE 1 2-3 Press K or L to make a selection, then press OK. If you select NO, the menu disappears and PROGRESSIVE is OFF. If you select YES, this appears: Confirm again to use progressive scan. If Picture is good, Select "YES". SELECT: K / L SET:OK NO YES Confirm your setting, then press OK. The menu will disappear and PROGRESSIVE will be ON. If you do not press any buttons for 15 seconds, Progressive Scan will switch to OFF. Helpful Hints • You can set PROGRESSIVE to OFF either in the DISPLAY menu or by pressing and holding PLAY B on the front of the Player for more than 5 seconds. • You can adjust PROGRESSIVE in the QUICK SETUP menu that appears when you first press SETUP.With QUICK selected, press OK. Press L to select PROGRESSIVE. Press OK to choose OFF or ON. Press SETUP to remove the menu.