Philips DVP5982C1 User manual - Page 54
English
View all Philips DVP5982C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
English Troubleshooting (continued) Problem The contents of the USB flash drive cannot be read Slow operation of the USB flash drive No HDMI video output No HDMI audio output Solution - The USB flash drive format is not compatible with the DVD player. - Drive is formatted with a different file system. (e.g. NTFS) - Big file size or high solution USB flash driver takes longer time to read and display on the TV screen. - HDMI connection can only be made to HDMI-equipped devices with HDCP (High Bandwidth Digital Content Protection). Use a separate adaptor (DVI to HDMI) for DVI TV connection (equipped with HDCP). - Make sure the resolution of this DVD player matches the TV device you have connected using the HDMI; 480p/576p/720p/1080i/1080p and this DVD player supports 1080p at 50/60Hz only. - When connecting to a non-HDCP complaint TV, the HDCP warning message will appear. - When the HDMI and RGB video connection are used at the same time, there will be no picture output from the RGB video connection, disconnect the HDMI cable. - Press HD UPSCALE if no picture on the TV screen after power off and on. - Check the connection between the TV and HDMI of DVD player. - During resolution selection for DVI TV, a distorted or black screen may appear, see HDMI Video Setup. - There will be no sound from the HDMI output if the source device is only DVI/HDCP (High Bandwidth Digital Content Protection)- compatible. - It is not possible to output SACD or copy-controlled DVD audio sources from the HDMI connection. 54 1_dvp5982MKII_37_eng 2.indd 54 2007-08-20 5:03:07 PM