Philips HDP1590 User manual - Page 12
Initial Installation
View all Philips HDP1590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Initial Installation 1 Push the POWER B button for 5 seconds till the power indicator turns to red to turn the device on. 2 Turn the device towards a suitable projection surface or wall. Note that the distance to the projection surface must be a minimum of 0.1 meter (0.33 feet) and a maximum of 0.5 meter (1.64 feet) (see Setting up the Device, page 4). Make sure the projector is in a secure position. 3 Use the focus wheel on the font of the device to adjust the image sharpness. 4 The first time you turn on the device, you should set the following settings. Notice During the first installation, use OK key to validate your choice and continue to the next step, and the ¿ key to return on the previous step. 5 Use the keys ¡/¢ to select the language and confirm with OK. 6 Use the keys to select the symbol + or - to set the date (day, month and year) and confirm with OK. 7 Use the keys ¡/¢ to select the date format and confirm with OK. 8 Use the keys ¡/¢ to select the time zone and confirm with OK. 9 Use the keys to select the symbol + or - to set the date (hour and minute) and confirm with OK. 10 Use the keys ¡/¢ to select the time format (12h or 24h) and confirm with OK. 11 Use the keys ¡/¢ to select the location (Home or Shop) and confirm with OK. Home: for normal use. Shop: when you choose this option, the projector starts in demonstration mode. In this mode, the projector automatically displays the pictures or videos stored in the internal memory in loop. Notice The demonstration mode can be activated or deactivated on the menu Setting/Maintenance/Demo mode. ECO mode Press shortly the B button on the panel control or on the remote control to put the device in ECO mode. To wake up the device, press shortly again on the B button. Setting up the Language The device has already been installed. In order to change the menu language, proceed as follows: 1 Use the navigation keys to select Settings. 2 Confirm with OK. 3 Select Language/ Language with ¡/¢. 4 Confirm with OK. 5 Select Menu Language with ¡/¢. 6 Confirm with OK. 7 Select you desired language with ¡/¢. 8 Confirm with OK. 9 Exit with u. 12 A message is displayed to give the address web site where the user manual can be downloaded. Press OK to continue. Turning off the projector Press the B button on the panel control of the device or on the remote control more than 5 seconds. Notice If you press the power B button on the control panel for 5 seconds the unit is turned off, you must hold the power B button down again for 5 seconds to turn it back on. 12 Philips · HDP15x0