Philips HDP1590 User manual - Page 33

11 Service Cleaning DANGER! Instructions for Cleaning! Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the device. Do not spray the device with any cleaning fluids. Wipe over the surfaces gently. Be careful that you do not scratch the surfaces. Cleaning the Lens Use a brush or lens cleaning paper for cleaning the lens of the projector. 12 The device turns off and on again. After around 5 minutes the Language Selection screen appears. The firmware update is now completed. DANGER! Inserting a Memory Card! Never pull out the memory card while the device is accessing it. This could cause data to be damaged or lost. Notice If an error occurs during the firmware update process retry the procedure or contact your dealer. DANGER! Do not use any Liquid Cleaning Agents Do not use any liquid cleaning agents for cleaning the lens, to avoid damaging the coating film on the lens. Device Overheated A overheat symbol appears if the device is overheated. Update Firmware with Memory Card 1 Use SD memory card in the file system FAT16 or FAT32. DANGER! All Data will be Deleted! This procedure erases all your data that is stored on the memory card. 2 Save the latest firmware update file to the root of the memory card. 3 Insert the memory card (see Inserting a Memory Card, page 18) and switch the device on. 4 Use the navigation keys to select Settings. 5 Confirm with OK. 6 Use ¡/¢ to select Maintenance. 7 Confirm with OK. 8 Use ¡/¢ to select Firmware Update. 9 Confirm with OK. 10 Use ¡/¢ to select Install. 11 Confirm with OK. Service 33