Philips HDP1590 User manual - Page 16
Copy the software on digital, media eg USB-stick, Install the ScreeneoWLink, software on my computer
View all Philips HDP1590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
8 On the Screeneo projector, to check that it is turned off (OFF). 9 Remove the digital media on your computer and insert it into the port of Screeneo for your digital media. 10 DANGER! Inserting the digital media! Never pull out the digital media while the device is accessing it. This could cause data to be damaged or lost. Switch the device off in order to make sure that the device does not access the memory card. 11 Long press the ON/OFF button on the projector to turn it on. 12 After the initial screen, the main menu appears. Use the navigation keys to select Settings. 13 Confirm with OK. 14 Use ¡/¢ to select Maintenance. 15 Confirm with OK. 16 Use ¡/¢ to select Firmware Update. 17 Confirm with OK. 18 Use ¡/¢ to select Install. 19 Confirm with OK. 20 The device turns off and on again. After around 5 minutes the Language Selection screen appears. The firmware update is now completed. Notice If an error occurs during the firmware update process retry the procedure or contact your dealer. Copy the software on digital media (eg USB-stick) Use the USB ports on the projector to insert digital media. 1 Use ¡/¢ to select APPs. 2 Confirm with OK. 3 Use ¡/¢ to select Explorer. 4 Confirm with OK. 5 Use ¡/¢ to select Internal Flash. 6 Confirm with OK. 7 Use ¢ to select Download. 8 ScreeneoWLink_Setup.exe file appears in the main window. 9 Press long OK button on the remote control. 10 Use ¡/¢ to select Copy. 11 Confirm with OK. 12 Use you move on to the digital media that you have connected. 13 Confirm with OK. 14 Press long OK button on the remote control. 15 Use ¡/¢ to select Paste. 16 Confirm with OK. 17 ScreeneoWLink_Setup.exe file is copied to the digital media. Wait that it appears in the browser window before removing the digital media projector. Install the ScreeneoWLink software on my computer 1 Insert the digital media containing the ScreeneoWLink_Setup.exe file on an appropriate port on your computer. 2 On desktop PC or laptop, select the digital media containing the file and double click the executable. 3 Follow the instructions that appear on the screen. 4 Agree to have the ScreeneWLink icon on your desktop. 5 When installation is complete, restart your computer. Link your projector and computer with WiFi Both devices must be connected to the same access point, no other network connection must be activated. As a precaution, note the name and the key to protection of your access point. On the Screeneo, 1 Use ¡/¢ to select Settings. 2 Confirm with OK. 3 Using ¡/¢ select Wireless and Networks. 4 Confirm with OK. 5 Using ¡/¢ select WIFI. 6 Confirm with OK. 7 Using ¡/¢ select the desired wireless network. 8 Confirm with OK. 9 If your network is protected by a password, a window appears. Select the input field with the navigation buttons on the remote and press OK. A virtual keyboard appears, using the navigation keys on the remote control, witch a mouse or external keyboard. Enter your password. 10 Click Connect. 16 Philips · HDP15x0