Philips TSU9600 User manual - Page 4

TSU9600 Starter's Guide Charging the Control Panel When the Battery level icon on your screen turns red, it is time to charge the Control Panel. The Control Panel will operate from one to several days depending on how your installer has configured it. Note The service life of the battery depends on the timeout settings and wireless network settings configured by your installer. Please contact your installer if you notice that the battery is deteriorating. When you place the Control Panel in the docking station, the red Charging LED on the front of the docking station lights up. When the Charging LED fades out, it means that the Control Panel is fully charged. This can take 3 to 4 hours. If the battery is low and the Charging LED does not light up, make sure that: • the power switch at the bottom of the Control Panel is switched to 1. • the docking station is plugged into the mains. The docking station glows when it is plugged in. • the Control Panel is located properly in the docking station. • the panel connector is clean and free of obstructions. Tip IIt is recommended that the Control Panel be placed in the docking station after use. The Control Panel still consumes power even while its screen has turned black. Enjoying Your Pronto Control Panel Controlling Your Home Theatre Activating the Control Panel screen • Tap the touch screen with the stylus included with the Control panel or with your finger. -Or• Press the Backlight key. 4