Philips TSU9600 User manual - Page 7

TSU9600 Starter's Guide Screen To change the Activation Settings • Tap the buttons to toggle between the various Activation settings: Pick up sensor: the Control Panel switches on when it is tilted. Firm keys: the Control Panel switches on and/or sends out an IR signal when a firm key is pressed. Cursor keys: the Control Panel switches on and/or sends out an IR signal when one of the cursor keys is pressed. To calibrate the touch screen: 1 Tap the Calibrate button. 2 Follow the on screen instructions to tap the 4 corners of the screen. The touch screen is now calibrated. To change the Time out and the Brightness settings: • Tap the '-' and '+' buttons to adjust the settings. To exit the Settings pages: • Press the right firm key labelled Exit. Note The screen is calibrated in the factory. Do not use this function unless you experience problems with the touch screen. Support Maintaining the Control Panel Take care not to damage the touch screen • Do not drop the Control Panel or subject it to heavy impact. • Use the stylus included or your finger to tap the touch screen. Attention In order to avoid scratching the touch screen, never use an actual pen, pencil or other sharp object on it. Protect the Control Panel from extremes of temperature Keep the Control Panel away from heaters and other heat sources. The Control Panel is not waterproof The Control Panel must not be exposed to rain or moisture. Do not store or use the Control Panel in any location that is extremely damp or wet. If you have spilt water on the Control Panel, you must turn it off by switching the Power switch to 0. Place the Control Panel in a clean environment to dry. 7