Pioneer 917V-K Owner's Manual - Page 57

Other connections 10 English Deutsch Français Italiano Nederlands Español Tip • You can select channels directly by pressing D.ACCESS then the three-digit channel number. • You can press DISP to change SIRIUS Radio information in the front panel display. • The currently selected channel is automatically chosen (without pressing ENTER) after 10 seconds. Saving channel presets This receiver can memorize up to 30 channels, stored in three banks, or classes, (A, B and C) of 10 stations each. 1 Select the channel you want to memorize. See Selecting channels and browsing by genre above. 2 Press T.EDIT. The display shows a blinking memory class. 3 Press CLASS to select one of the three classes then press / to select the channel preset you want. You can also use the number buttons to select a preset. 4 Press ENTER. After pressing ENTER, the preset class and number stop blinking and the receiver stores the SIRIUS channel. Tip • You can also press  during reception display to save the information of up to 8 songs. See Using the SIRIUS Menu below to recall this information. Listening to channel presets You will need to have some presets stored to do this. 1 Press CLASS to select the class in which the channel is stored. Press repeatedly to cycle through classes A, B and C. 2 Press / to select the channel preset you want. • You can also use the number buttons on the remote control to recall the channel preset. Using the SIRIUS Menu The SIRIUS Menu provides additional SIRIUS Radio features. 1 Press TOP MENU. 2 Use / to select a menu item then press ENTER. Choose between the following menu items: • Memory Recall - Use / to browse your saved song information (see Tip above) • Channel Skip/Add - Use / and ENTER to select channels you would like to remove/restore from/to the channel guide. • Parental Lock - Use / and ENTER to select channels you would like to place under parental lock. Channels put under parental lock are not displayed in the Channel Guide, but may be accessed by directly inputting their channel number and providing the parenal lock password. • Antenna Aiming - Check the strength of satellite and terrestrial reception. • Password Set - Set the parental lock password. 3 When you're finished press TOP MENU to return to the reception display. Connecting using HDMI If you have a HDMI or DVI (with HDCP) equipped component, you can connect it to this receiver using a commercially available HDMI cable. The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio that the connected component is compatible with, including DVD-Video, DVD-Audio (see below for limitations), Video CD/Super VCD, CD and MP3. 57 En