Pioneer 917V-K Owner's Manual - Page 58

10 Other connections HDMI/DVI-equipped component AUDIO OUT R AUDIO L DIGITAL OUT HDMI OUT DIGITAL OUT IN OPT IN OPT 2 (TV/ SAT) IN OPT 1 (CD) OUT ASSIGNABLE DIGITAL IN IN ASSIGNABLE DIGITAL IN XM IN IN COAX 2 (DVR / VCR) IN COAX 1 (DVD/LD) OUT R AUDIO AUX FM UNBAL 75 Ω CD DVR / VCR TV / SAT AM LOOP ANTENNA VIDEO IN DVD / LD IN FRONT PLAY CD-R D V D 5.1CH INPUT IN / TAPE / MD REC L CEN- SUB TER WOOFER SIRIUS IN MONITOR OUT OUT CONTROL IN Y R SURROUND L DVD 5.1CH INPUT OUT ASSIGNABLE (DVD/LD) IN 1 (TV/SAT) IN 2 OUT HDMI IN 3 IN 1 PB PR ASSIGNABLE Y PB PR OUT MONITOR OUT DVR / VCR IN TV / SAT IN SR P E SUB WOOFER A DVD / LD A PREOUT IN K S-VIDEO E R S FRONT MONITOR OUT COMPONENT VIDEO IN 2 LR SURROUND L CENTER R SURROUND BACK L B HDMI IN HDMI/DVI-compatible monitor or plasma display 1 Use an HDMI cable to connect the HDMI IN 1/2 interconnect on this receiver to an HDMI output on your HDMI component. 2 Use an HDMI cable to connect the HDMI OUT interconnect on this receiver to an HDMI interconnect on a HDMI-compatible monitor. • The arrow on the cable connector body should be facing right for correct alignment with the connector on the player. 3 To hear audio from your HDMI component through this system, make analog and/or digital connections as necessary. On the rear panel, you must connect to the audio jacks from a set of audio/video inputs (for example, DVR/VCR as shown in the illustration). • Without this connection, HDMI audio will still be output from your TV or plasma display (though no sound will be heard from this receiver). 4 Assign the HDMI input(s) you connected to the corresponding input source. After connecting, you must specify which inputs(s) you are using for your HDMI component in Assigning the HDMI inputs on page 63. 5 Use the input source buttons to select the input source you assigned in the previous step, then press SIGNAL SEL after press RECEIVER button to select the audio input signal. You can also use the front panel controls to do this (see Choosing the input signal on page 33). • If the video signal does not appear on your TV or plasma display, try adjusting the resolution settings on your component or display. Note that some components (such as video game units) have resolutions that may not be displayed. In this case, use an (analog) S-video or composite connection. About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVIcompliant displays. HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs. HDMI, the logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. 58 En