Pioneer AVHP5000DVD Other Manual - Page 2

Connecting the Units Connecting the power cord Wired remote input Hard-wired remote control adaptor can be connected (sold separately). 1.5 m (4 ft. 11 in.) Gray USB cable (supplied) Connect to separately sold USB device. 20 cm (7-7/8 in.) USB input This product Fuse (10 A) Yellow Connect to the constant 12 V supply terminal. Red Connect to terminal controlled by ignition switch (12 V DC). Orange/white Connect to lighting switch terminal. Fuse resistor Fuse resistor Black (chassis ground) Connect to a clean, paint-free metal location. + Front speaker ≠ Left Rear speaker or + Subwoofer (4 Ω) ≠ White Gray White/black Green Gray/black Violet Green/black Violet/black + Front speaker ≠ Right + Rear speaker or ≠ Subwoofer (4 Ω) When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything to Green and Green/black leads. Green Not used. Green/black Violet Violet/black + Subwoofer (4 Ω) × 2 ≠ Interface cable (e.g., CD-I200) (sold separately) Dock connector Connect to separately sold iPod. 80 cm (2 ft. 7 in.) 80 cm (2 ft. 7 in.) Tuner box (supplied) IP-BUS input IP-BUS cable (Blue) Multi-CD player (sold separately) Yellow/black Antenna cable If you use an equipment with Mute function, wire this lead to the Audio Mute lead on (supplied) that piece of equipment. If not, keep the Audio Mute lead free of any connections. Connection method 1. Clamp the lead. 2. Clamp firmly with needle-nosed pliers. Note: • The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner's Manual or dealer. Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). Power supply side Ground side Parking brake switch With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. When you connect the separately sold multichannel processor (e.g., DEQ-P8000) to this unit, do not connect anything to the speaker leads and system remote control (blue/white). Note: • Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural. When connecting to separately sold power amp This product Rear output or subwoofer output (REAR/SUBWOOFER/DEQ OUTPUT) 15 cm (5-7/8 in.) Front output (FRONT OUTPUT) 15 cm (5-7/8 in.) Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). When you connect the separately sold multichannel processor (e.g., DEQ-P8000) to this unit, do not connect anything to the speaker leads and system remote control (blue/white). When you connect the multi-channel processor to this unit, refer to multi-channel processor's installation manual for the connection method. ENGLISH Power amp (sold separately) Connect with RCA cables (sold separately) Power amp (sold separately) System remote control Left Right + + Front speaker Front speaker ≠ ≠ Rear speaker + or subwoofer ≠ + Rear speaker ≠ or subwoofer Perform these connections when using the optional amplifier. Note: • Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural.