Pioneer AVHP5000DVD Other Manual - Page 3

Connecting the Units When connecting with a rear view camera When this product is used with a rear view camera, it is possible to automatically switch from the video to rear view image when the gear shift is moved to REVERSE (R). WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION • The screen image may appear reversed. • The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this function for entertainment purposes. • Objects in the rear view may appear closer or more distant than they actually are. This product Rear view camera input (REAR VIEW CAMERA IN) CAUTION You must use a camera which outputs mirror reversed images. Rear view camera 20 cm (7-7/8 in.) 15 cm (5-7/8 in.) RCA cable (sold separately) To video output Violet/white Fuse resistor Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. This connection enables the unit to sense whether the car is moving forwards or backwards. Connection method 1. Clamp the lead. 2. Clamp firmly with needle-nosed pliers. Note: • It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when connecting the rear view camera. When connecting with a multi-channel processor This product IP-BUS cable (supplied with DVD player) 25 cm Video input (9-7/8 in.) (VIDEO INPUT) IP-BUS input (Blue) Blue DEQ output (REAR/ SUBWOOFER/DEQ OUTPUT) Black Optical cable connection box (supplied with multi-channel processor) 15 cm (5-7/8 in.) Optical cable (supplied with multi-channel processor) RCA cable (supplied with multi-channel processor) Optical cable (sold separately) DVD player (e.g., XDV-P6) (sold separately) Blue Black Hide-away unit (supplied with DVD player) Blue Front video output (Yellow) Black Black Multi-channel processor (e.g., DEQ-P8000) (sold separately) 25 pin cable (supplied with DVD player) RCA cable (supplied with DVD player) Black Blue IP-BUS cable (supplied with multi-channel processor) When you connect a separately sold DVD player to the separetely sold multi-channel processor, the optical cable from DVD player must be connected to the optical cable 2 input (OPT. IN2) of the multi-channel processor. IP-BUS cable Multi-CD player (sold separately) You can use only one video component with this unit. Connecting and installing the optical cable connection box WARNING • Avoid installing this unit in locations where the operation of safety devices such as airbags is prevented by this unit. Otherwise, there is a danger of a fatal accident. • Avoid installing this unit in locations where the operation of the brake may be prevented. Otherwise, it may result in a traffic accident. • Fix this unit securely with the hook and loop fastener or lock tie. If this unit is loose, it disturbs driving stability, which may result in a traffic accident. CAUTION • Install this unit using only the parts supplied with this unit. If other parts are used, this unit may be damaged or could dismount itself, which leads to an accident or other problems. • Do not install this unit near the doors where rainwater is likely to be spilled on the unit. Incursion of water into the unit may cause smoke or fire. Connecting the optical cable 1. Connect the optical cable and ground lead to the main unit. Connect the optical cable so that it does not protrude from the unit, as shown in the illustration. Fasten the ground lead to the protrusion on the back of the unit. Screw 2. Connect the optical cable to the optical cable connection box. Optical cable Installing the optical cable connection box • When installing the optical cable connection box with the hook and loop fastener. Install the optical cable connection box using the hook and loop fastener in the ample space of the console box. Hook fastener Loop fastener • When installing the optical cable connection box with the lock tie. Wrap the optical cable and connection box with the protection tape and fasten with the power code using the lock tie. Wrap with the protection tape Fasten with the lock tie ENGLISH When connecting the external video component and the display Rear monitor output (REAR MONITOR OUTPUT) 20 cm (7-7/8 in.) This product To video input Display with RCA input jacks (sold separately) Video input (VIDEO INPUT) 25 cm (9-7/8 in.) Audio input (AUDIO INPUT) RCA cables (sold separately) To video output External video component (sold separately) To audio outputs • It is necessary to set AV INPUT to VIDEO in SYSTEM MENU when connecting the external video component. • It is necessary to set AV INPUT to S-DVD in SYSTEM MENU when connecting a multi-DVD player. When using a display connected to rear video output This product's rear video output is for connection of a display to enable passengers in the rear seats to watch the DVD or Video CD. WARNING • NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while driving.