Pioneer AVHP7800DVD Other Manual - Page 17

English Español Deutsch Mounting with Velcro Tape Thoroughly wipe off the surface before affixing the velcro tape. Hide-away unit Velcro tape (large) (hard) Velcro tape (large) (soft) Car mat or chassis Fig. 12 DIN Front/Rear-mount This unit can be properly installed either from "Front" (conventional DIN Front-mount) or "Rear" (DIN Rearmount installation, utilizing threaded screw holes at the sides of unit chassis). For details, refer to the following illustrated installation methods. Before installing the unit • Remove the holder. (Fig. 13) Loosen the screws (2 × 3 mm) and then remove the holder. DIN Front-mount Installation with the rubber bush 1. Decide the position of the side brackets. (Fig. 14) When installing in a shallow space, change the position of side brackets. In this case, stick conceal tape on parts that protrude from the dashboard. Conceal tape Side bracket Flush surface screw (5 × 6 mm) Fig. 14 Français Italiano Nederlands PyÒÒÍËÈ Holder Screw (2 × 3 mm) Fig. 13 16