Pioneer AVHP7800DVD Other Manual - Page 18
DIN Rear-mount
UPC - 012562799179
View all Pioneer AVHP7800DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation 2. Install the unit into the dashboard. (Fig. 15) After inserting the holder into the dashboard, then select the appropriate tabs according to the thickness of the dashboard material and bend them. (Install as firmly as possible using the top and bottom tabs. To secure, bend the tabs 90 degrees.) Dashboard 182 53 Rubber bush Screw Holder DIN Rear-mount Installation using the screw holes on the side of the unit • Fastening the unit to the factory radio mounting bracket. (Fig. 17) (Fig. 18) (Fig. 19) Select a position where the screw holes of the bracket and the screw holes of this product become aligned (are fitted), and tighten the screws at 2 places on each side. Use any of binding screws (4 × 3 mm), binding screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of the screw holes in the bracket. *1 Use binding screws (4 × 3 mm) only. Side bracket Screw (2 × 3 mm) Fig. 15 3. After installing the unit into the dashboard, attach the frame. (Fig. 16) When attaching the frame, place the narrow side of the frame downward. *1 *1 Fig. 17 Frame Fig. 16 17