Pioneer BDP-09FD Owner's Manual - Page 21

Chapter 3 03 Getting Started Making settings using the Setup Navigator menu Be sure to perform these settings when using the player for the first time. Caution • Before turning on the power, check that the connections between the player and other devices are correct. Also, turn on the power of the devices connected to the player before turning on the player's power. 1 Turn on the TV's power and switch the input. See the TV's operating instructions for instructions on operating the TV. If TV Control is set, the TV can be operated with the player's remote control (page 23). 2 Turn on the player's power. Press  STANDBY/ON. STANDBY/ON OPEN/CLOSE TV CONTROL INPUT SELECT CH VOL Check that the Setup Navigator menu is displayed.  If the Setup Navigator menu is not displayed  Press HOME MENU to display the Home Menu, select Initial Setup  Setup Navigator  Start, then press ENTER. 3 Select the OSD language. Use / to select, then press ENTER. TOP MENU TOOLS When a Pioneer Flat Panel TV that is compatible with KURO LINK is connected to this player's HDMI OUT (MAIN) terminal, language settings are imported from the Pioneer Flat Panel TV's language settings before Setup Navigator begins. 4 Select and set the video and audio output terminals. Select the actually connected video and audio output terminals. Use to select, then press ENTER. TOP MENU TOOLS HOME MENU ENTER RETURN Setup Navigator BD PLAYER Select the output terminals to be used for the video and audio signals of this player. Video Audio Use [ ][ press [ ][ HDMI MAIN HDMI MAIN ] to select video or audio, then ] to select the output terminal. Audio Video Setting item HDMI MAIN HDMI SUB COMPONENT/S/ VIDEO HDMI MAIN DIGITAL AUDIO ANALOG AUDIO Output terminal name HDMI OUT (MAIN) HDMI OUT (SUB) VIDEO OUT COMPONENT VIDEO S-VIDEO VIDEO HDMI OUT (MAIN) DIGITAL OUT COAXIAL OPTICAL AUDIO OUT (7.1 ch) HOME MENU ENTER RETURN Setup Navigator BD PLAYER Please select the on-screen display language. Audio, subtitle and BDMV/DVD-Video menu language will also be set. Caution • The video and audio signals output from the set output terminals are output synchronously (lip synchronization). • When HDMI MAIN or DIGITAL AUDIO is selected at Audio, linear PCM audio signals (2 channels) are output from all terminals other than the ones selected at Audio. • When ANALOG AUDIO is selected at Audio, no audio signals are output from the HDMI OUT or DIGITAL OUT terminals. • The HDMI OUT (SUB) terminal outputs linear PCM 2-channel audio signals. HDMI SUB cannot be selected for Audio. To listen to the device connected to the HDMI OUT (SUB) terminal, select HDMI MAIN. 21 En