Pioneer BDP-09FD Owner's Manual - Page 69

KURO LINK 07 Problem KURO LINK function does not work. Check Remedy • Is the HDMI cable properly connected? • Are you connected to the HDMI OUT (SUB) terminal? To use the KURO LINK function, connect the Flat Panel TV and AV system (AV receiver or amplifier, etc.) to the HDMI OUT (MAIN) terminal (page 16). Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The KURO LINK function may not work properly if HDMI cable other than a High Speed HDMI™ cable is used. Is KURO LINK set to On on the player? Set KURO LINK to On on the player (page 45). Does the connected device support the KURO LINK function? • The KURO LINK function will not work with devices manufactured by companies other than Pioneer, even when connected using an HDMI cable. • The KURO LINK function will not work if devices that do not support the KURO LINK function or devices manufactured by companies other than Pioneer are connected between the KURO LINK-compatible device and the player. • Even when connected to a Pioneer product compatible with the KURO LINK function, some of the functions may not work. Also refer to the operating instructions of the connected device. Is KURO LINK set to On on the connected device? Set KURO LINK to On on the connected device. The KURO LINK function operates when KURO LINK is set to On for all devices connected to the HDMI OUT (MAIN) terminal. Once connections and settings of all the devices are finished, be sure to check that the player's picture is output to the Flat Panel TV. (Also check after changing the connected devices and connecting and/or disconnecting HDMI cables.) If the player's picture is not being output to the Flat Panel TV, the KURO LINK function may not work properly. For details, refer to the operating instructions of the connected device. Are multiple players connected? The KURO LINK function may not work if three or more players, including this player, are connected by HDMI cable. Others Problem Check Remedy The player's power turns off Is Auto Power Off set to On? automatically. If Auto Power Off is set to On, the player's power turns off automatically if no operation is performed for over 30 minutes (page 46). The player's power turns on Is KURO LINK set to On? or off automatically. The player's power may turn on and off together with the power of the TV connected to the HDMI OUT (MAIN) terminal. If you do not want the player's power to turn on and off when the TV's power is turned on and off, set KURO LINK to Off (page 45). Player cannot be operated Is an AV receiver or amplifier connected to the CONTROL IN Operate with the remote control of the device connected to the with remote control. terminal on the player's rear panel? CONTROL IN terminal. Are you operating the remote control from a point too far away Operate from within 23 feet of the remote control sensor. from the player? Are the batteries dead? Replace the batteries (page 7). Input of connected TV and AV Is KURO LINK set to On? system switches automatically. The input of the TV and AV system (AV receiver or amplifier, etc.) connected to the HDMI OUT (MAIN) terminal may automatically switch to the player when playback starts on the player or the menu screen (Home Media Gallery, etc.) is displayed. If you do not want the inputs of the connected TV and AV system (AV receiver or amplifier, etc.) to switch automatically, set KURO LINK to Off (page 45). 69 En