Pioneer BDP-09FD Owner's Manual - Page 68

07 Problem Sound is fast or slow. Check When an HDMI cable is connected, are audio signals being output from devices connected with cables other than HDMI cables? Remedy When a Pioneer AV receiver or amplifier compatible with the PQLS function is connected directly to the player's HDMI OUT (MAIN) terminal using an HDMI cable, the PQLS function is activated when playing an audio CD (CD-DA). Because of this, the sound output from components other than the ones connected by HDMI cable may be fast or slow. If this happens, set PQLS to Off (page 45). After a disc is inserted, Are there too many files recorded on the disc? Loading stays displayed and playback does not start. When a disc on which files are recorded is inserted, depending on the number of files recorded on the disc, loading may take several dozen minutes.  is displayed in file names, etc. The characters that cannot be displayed on this player are displayed in . A message indicating low memory (local storage) appears while playing a BD-ROM disc. Erase the BDMV data (page 51). The DVD layer of BD and DVD Is Hybrid Disc Playback properly set? hybrid discs cannot be played. Set Hybrid Disc Playback to DVD (page 45). The CD layer of BD and CD hybrid discs cannot be played. Is Hybrid Disc Playback properly set? Set Hybrid Disc Playback to CD (page 45). The BDMV format on BD-R/ -RE discs cannot be played. To play the BDMV format on BD-R/-RE discs containing both BDMV and BDAV formats, set BDMV/BDAV Playback Priority to BDMV (page 45). Software updating Problem Check Remedy "Connection to the software updating server failed" is displayed when you try to update the software. Perform Connection Test (page 51). If "Network connection test completed successfully." is displayed, check the proxy server settings (page 50). Also there may be a problem with the Internet connection. Contact your Internet service provider. Software updating is slow. Depending on the Internet connection and other conditions, some time may be required to update the software. • "WRT NG ****" is displayed on the front panel display during software updating. (**** meaning any characters) • "WRT FAILED" is displayed on the front panel display during software updating. The message is displayed when software updating has failed. Check again whether it can be updated properly. A message other than "Network connection test completed successfully" is displayed when Connection Test is performed. Is "LAN cable not connected" displayed? • Is "IP address cannot be obtained." displayed? • Is "No response from the gateway." displayed? Check that this player and Ethernet hub (or router with hub functionality) are properly connected. • If the IP address is obtained using the DHCP server function, check the setting is correct at the Display Network Configuration (page 51). For details on the DHCP server function, see the operating instructions of the Ethernet hub (or router with hub functionality). • Set the IP address manually. Is "IP address is overlapped." displayed? • Check the operation and settings of the DHCP server function of the Ethernet hub (or router with hub functionality). For details on the DHCP server function, see the operating instructions of the Ethernet hub (or router with hub functionality). • If this player's has been set manually, reset the IP address of this player or other components. Is the Ethernet hub (or router with hub functionality) operating • Check the settings and operation the Ethernet hub (or router properly? with hub functionality). For details, see the operating instructions of the Ethernet hub. 68 • Reboot the Ethernet hub (or router with hub functionality). En