Pioneer DEX-P9 Owner's Manual - Page 78
DIN Rear-mount
View all Pioneer DEX-P9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Installation DIN Rear-mount Installation using the screw holes on the side of the unit 1. Remove the frame. (Fig. 11) Frame Insert the release pin into the hole in the bottom of the frame and pull out to remove the frame. (When reattaching the frame, point the side with a groove downwards and attach it.) 2. Fastening the unit to the factory radio mounting bracket. (Fig. 12) (Fig. 13) Select a position where the screw holes of the bracket and the screw holes of the head unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either binding screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of the screw holes in the bracket. Fig. 11 Factory radio mounting br1a2cket 77 1S1crew Fig. 12 1D3ashboard or Console Fig. 13