Pioneer DJM-400 - CDJ-400 Package Operating Instructions - Page 6

NAMES AND FUNCTIONS OF PARTS NAMES AND FUNCTIONS OF PARTS 1 2 6 Channel equalizer low-range adjust dial (LOW) POWER Use to adjust the bass (low-range) frequency sound MIC MIC 1 LEVEL CD 1 PHONO 1 /LINE 1 CD 2 PHONO 2 /LINE 2 MASTER LEVEL 13 for each channel (includes kill function). (Adjustable range: -∞ to +9 dB) 24 TRIM 3 2 CHANNEL DJ MIXER TRIM 3 14 7 Channel level indicators Display the current level for each channel, with 0.6 25 0 MIC 2 LEVEL + 9 4 HI MASTER LEVEL + 9 4 HI 0 BEAT EFFECTS BPM 15 second peak hold. 8 Channel fader levers Use to adjust sound volumes for each channel. 0 AUTO (Adjustable range: -∞ to 0 dB) 26 EQ LOW HI OVER + 9 5 MID 4 2 EQ 0 OVER + 9 1 12 5 4 MID 2 TAP 2 34 0 EQ 16 9 Channel 1 fader start button/indicator (FADER START) 17 Pressing this button toggles ON/OFF, the fader start/ -2 -2 + 9 4 11 + 9 back cue function for the DJ CD player connected to MIC 27 6 LOW -4 -10 6 -4 LOW -10 BEAT PITCH 8 21 ERASE 18 channel 1. The button lights when set to ON. When set to ON, the operation differs depending on the OFF ON TALK OVER dB dB 16 41 setting of the cross fader selector switch. + 9 7 + 9 BEAT BANK 19 ¶ When the cross fader selector switch is at the left (THRU) position, the function is linked to the HEADPHONES CH-1 CH-2 MASTER 10 10 9 9 8 8 7 7 FLANGER FILTER ECHO DELAY PHASER ROBOT ROLL IN-LOOP SAMPLER CH. SELECT 20 operation of the channel fader lever (not linked to cross fader). ¶ When the cross fader selector switch is at the middle ( ) or right ( ) position, the function is 8 6 5 86 5 2 MIC 1 MASTER linked to the cross fader lever (not linked to 28 29 4 3 2 1 LEVEL 0 FADER START 9 4 3 2 1 0 11 10 FADER START LEVEL/DEPTH 21 channel fader). 10 Channel 2 fader start button/ indicator (FADER START) 22 Pressing this button toggles ON/OFF, the fader start/ back cue function for the DJ CD player connected to 0 THRU MIN MAX ON/OFF channel 2. The button lights when set to ON. When 23 set to ON, the operation differs depending on the setting of the cross fader selector switch. ¶ When the cross fader selector switch is at the left PHONES (THRU) position, the function is linked to the operation of the channel fader lever (not linked to cross fader). 30 12 ¶ When the cross fader selector switch is at the middle ( ) or right ( ) position, the function is linked to the cross fader lever (not linked to 1 Channel 1 input selector switch CD 1: The CD input connectors (line level input) are selected. PHONO 1/LINE 1: PHONO/LINE input connectors are selected. ¶ The connection panel's PHONO/LINE switch is used to switch the function of the channel 1 connectors between phonograph input (analog turntable input) and line input (line level input). 2 Channel 2 input selector switch CD 2: The CD input connectors (line level input) are selected. PHONO 2/LINE 2: PHONO/LINE input connectors are selected. ¶ The connection panel's PHONO/LINE switch is used to switch the function of the channel 2 connectors between phonograph input (analog turntable input) and line input (line level input). 3 TRIM adjust dial Use to adjust the input level for each channel. (Adjustable range: -∞ to +9 dB, mid-position is about 0 dB) 4 Channel equalizer high-range adjust dial (HI) Use to adjust the treble (high-range) frequency sound for each channel (includes kill function). (Adjustable range: -∞ to +9 dB) channel fader). 11 Cross fader selector switch Select whether or not to use the cross fader, and to select from two types of curve response. ¶ When the switch is set to left (THRU) position, the cross fader is disabled, and the channel fader output is mixed without passing through the cross fader. ¶ When this switch is set to the center ( ) position, the cross fader is enabled, and a slowly rising curve response is selected. ¶ When set to the right position ( ), the cross fader is enabled, and a rapidly rising curve response is selected (as soon as the lever leaves the [< 1] side, the [2 >] sound is heard). 12 Cross fader lever Outputs channel 1 and channel 2 sounds in accordance with cross fader curve response selected with the cross fader selector switch. The cross fader function is disabled when the cross fader selector switch is set to the [THRU] position. 13 Master level indicators (MASTER LEVEL) These indicators show the master output level in a monaural display. Each indicator has a 0.6 second peak hold. 14 Master output level dial (MASTER LEVEL) Use to adjust the master output level. (adjustable range: -∞ to 0 dB) 5 Channel equalizer mid-range adjust dial (MID) Use to adjust the mid-range frequency sound for each channel (includes kill function). (Adjustable range: -∞ to +9 dB) 6