Pioneer HTP-074 Operating Instructions - Page 5

1 Controls and displays Display 14 15 16 17 18 16 19 2 4 34 20 21 22 23 24 24 25 14 PHASE Lights when the Phase Control is switched on (page 25). 15 AUTO Lights when the Auto Surround feature is switched on (page 23). 16 Tuner indicators RDS - Lights when an RDS broadcast is received (page 21). (For Europe) ST - Lights when a stereo FM broadcast is being received in auto stereo mode (page 20). TUNE - Lights when a normal broadcast channel. PRESET - Shows when a preset radio station is registered or called. MEM - Blinks when a radio station is registered. kHz/MHz - Lights when the character display is showing the currently received AM/FM broadcast frequency. 17 Speaker indicators Shows if the speaker system is on or not (page 4). SP A means the speakers are switched on. SP means the speakers are switched off. 18 Sleep timer indicator Lights when the receiver is in sleep mode (page 6). 19 PRESET information or input signal indicator Shows the preset number of the tuner or the input signal type, etc. 20 Character display Displays various system information. 21 DTS indicators DTS - Lights when a source with DTS encoded audio signals is detected. HD - Lights when a source with DTS-EXPRESS or DTSHD encoded audio signals is detected. 96/24 - Lights when a source with DTS 96/24 encoded audio signals is detected. NEO:6 - When one of the NEO:6 modes of the receiver is on, this lights to indicate NEO:6 processing (page 23). 22 Dolby Digital indicators D - Lights when a Dolby Digital encoded signal is detected. D+ - Lights when a source with Dolby Digital Plus encoded audio signals is detected. HD - Lights when a source with Dolby TrueHD encoded audio signals is detected. PLII - Lights to indicate Pro Logic II decoding (see Listening in surround sound on page 23 for more on this). 23 ADV.S. Lights when one of the Advanced Surround modes has been selected (see Using the Advanced surround on page 24 for more on this). 24 SIGNAL SELECT indicators DIGITAL - Lights when a digital audio signal is selected. Blinks when a digital audio signal is selected and selected audio input is not provided. HDMI - Lights when an HDMI signal is selected. Blinks when an HDMI signal is selected and selected HDMI input is not provided. 25 DIR. Lights when the DIRECT or PURE DIRECT mode is switched on (page 24). 5