Plantronics Voyager 5200 Office and UC User Guide - Page 15
Reset sensors, Disable sensors
View all Plantronics Voyager 5200 Office and UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Reset sensors You may need to reset the sensors if they are not working as expected. • Wearing the headset, tap the Call button to test sensors. A talk time voice alert means sensors are working. A tone or lack of voice prompts means sensors need to be reset. • To reset the sensors, power on the headset, connect the headset to a USB cable and plug the cable into your computer's USB port or an AC wall adapter (not included). Then place the headset on a flat, non-metallic surface for more than 10 seconds. • If you don't have your charging cable available you can also reset your sensors by first turning off the headset, then pressing and holding the Call and Mute buttons simultaneously until the LED turns off. Then put on your headset and turn it on. Disable sensors • You can disable your headset smart sensors through Plantronics Hub software under the Settings menu or in an idle state (not on a call or streaming music). Simultaneously press and hold the Call and Mute buttons for 5 seconds and a voice prompt will inform you of smart sensors status. 15