ProForm 1010 Zlt Treadmill Uk Manual - Page 12

10. Set the console assembly face down on a soft surface to avoid scratching the console 10 assembly. A 107 Remove the Screws (A) attaching the Crossbar (107). Next, lift off the Crossbar. Discard the Screws. Console Assembly 11. IMPORTANT: To avoid damaging the Crossbar (107), do not use power tools and do not overtighten the #10 x 3/4" Screws (2). There may be two Screws (A) in the Handrails (82, 83) in the indicated locations. If there are, remove and discard them. Orient the Crossbar (107) as shown. Attach the Crossbar to the Handrails (82, 83) with four #10 x 3/4" Screws (2) and four 1/4" Star Washers (12); do not tighten the Screws yet. Insert the Console Frame (102) into the Handrails (82, 83). Attach the Console Frame with four 1/4" x 1" Screws (9) and four 1/4" Star Washers (12); do not tighten the Screws yet. Be careful not to pinch the Upright Wire (87). Tighten one #10 x 3/4" Screw (2) in each end of the Crossbar (107); do not overtighten the Screws. Then, tighten the other #10 x 3/4" Screw (2) in each end of the Crossbar. Tighten the four 1/4" x 1" Screws (9) and the four #8 x 3/4" Screws (1). 11 First 2 12 9 12 102 A 107 First 2 12 9 12 82 87 A 1 83 1 12