ProForm 1350 Zlt Treadmill Uk Manual - Page 11
The Screws will be, used in a later step.
View all ProForm 1350 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Set the Console Base (98) face down on a soft surface to avoid scratching the Console Base. Remove the two screws (C) from the Pulse Crossbar (81). Remove the Pulse Crossbar and discard the screws. Remove the four 5/16" x 5/8" Screws (11) from the Console Frame (101). The Screws will be used in a later step. 10 11 81 101 C 98 11 11. Identify the Left and Right Trays (95, 96). 11 Attach the Trays (95, 96) to the Console Base (98) with eight #8 x 1/2" Screws (1). Note: It may be easier to start the two inside Screws and then slide the Trays into place before tightening the 1 other six Screws. Note: It may be necessary to rotate the Console Frame (101) upward when attaching the Trays (95, 96). 96 1 101 1 98 95 1 1 11
11
98
81
11
11
C
10
10.
Set the Console Base (98) face down on a soft
surface to avoid scratching the Console Base.
Remove the two screws (C) from the Pulse
Crossbar (81). Remove the Pulse Crossbar and
discard the screws.
Remove the four 5/16" x 5/8" Screws (11) from
the Console Frame (101).
The Screws will be
used in a later step.
101
98
96
95
101
1
1
11
11.
Identify the Left and Right Trays (95, 96).
Attach the Trays (95, 96) to the Console Base
(98) with eight #8 x 1/2" Screws (1). Note: It may
be easier to start the two inside Screws and then
slide the Trays into place before tightening the
other six Screws.
Note: It may be necessary to rotate the Console
Frame (101) upward when attaching the Trays
(95, 96).
1
1
1