ProForm 1350 Zlt Treadmill Uk Manual - Page 13
Make sure that no wires are pinched., Start, all four Screws, but do not tighten them yet., Start
 |
View all ProForm 1350 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
14. S et the console assembly on the Handrails (79). Make sure that no wires are pinched. Insert 14 the excess Upright Wire (91) behind the Console Frame (101). Attach the console assembly to the brackets on the Handrails (79) with the four 5/16" x 5/8" Screws (11) that you removed in step 10. Start all four Screws, but do not tighten them yet. 79 11 Console Assembly 101 91 79 11 15. A ttach the Pulse Crossbar (81) to the console assembly with six #8 x 1/2" Screws (1). Start all 15 six Screws, and then tighten them. Firmly tighten the four 5/16" x 5/8" Screws (11). Console Assembly 11 81 1 1 16. Tighten all six 3/8" x 4" Screws (3). 16 11 1 3 3 13
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
13
14.
Set the console assembly on the Handrails (79).
Make sure that no wires are pinched.
Insert
the excess Upright Wire (91) behind the Console
Frame (101).
Attach the console assembly to the brackets
on the Handrails (79) with the four 5/16" x 5/8"
Screws (11) that you removed in step 10.
Start
all four Screws, but do not tighten them yet.
14
79
Console
Assembly
11
11
91
79
101
15.
Attach the Pulse Crossbar (81) to the console
assembly with six #8 x 1/2" Screws (1).
Start all
six Screws, and then tighten them.
Firmly tighten the four 5/16" x 5/8" Screws (11).
16.
Tighten all six 3/8" x 4" Screws (3).
15
16
81
Console
Assembly
11
11
1
3
1
3
1