ProForm 1350 Zlt Treadmill Uk Manual - Page 14

17. Raise the Frame (57) to the position shown. Have a second person hold the Frame until 17 this step is completed. Orient the Storage Latch (54) so that the large barrel and the latch knob are oriented as shown. Remove any ties from the end of the Storage Latch (54). Attach the lower end of the Storage Latch to the Base (29) with a 3/8" x 2" Bolt (2) and a 3/8" Nut (9). Attach the upper end of the Storage Latch (54) to the Frame (57) with a 3/8" x 2" Bolt (2) and a 3/8" Nut (9). 57 9 2 54 Latch Knob Large Barrel 29 9 2 18. A ttach a Wheel (93) to the Base (29) with a 3/8" x 2 1/2" Bolt (7) and a 3/8" Nut (9). Do not over- 18 tighten the Nut; the Wheel must turn freely. 57  Attach the other Wheel (93) to the other side of the Base (29) in the same way. See HOW TO FOLD THE TREADMILL on page 25. Lower the Frame (57) to the floor. 7 93 9 29 9 93 7 19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 27 and 28). 14