ProForm 1350 Zlt Treadmill Uk Manual - Page 12
If You Do Not Connect The Con
View all ProForm 1350 Zlt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12. IMPORTANT: To avoid damaging the Pulse Crossbar (81), do not use power tools and do 12 not overtighten the #10 x 3/4" Screws (4). Orient the Pulse Crossbar (81) as shown. Attach the Pulse Crossbar to the Handrails (79) with four #10 x 3/4" Screws (4) and four #10 Star Washers (5). Start all four Screws, and then tighten them. Make sure that the Upright Wire (91) isn't pinched. Firmly tighten the four 5/16" x 2 3/4" Screws (12). 91 4 81 5 79 12 4 79 5 12 13. W ith the help of a second person, hold the console assembly near the Handrails (79) (only one 13 is shown). Connect the ground wire from the console assembly to the Ground Wire (80) on the Pulse Crossbar (81). Connect the Upright Wire (91) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Console Assembly Ground Wire 80 91 Console Wire 91 81 Wire Tie Console Wire 79 12