ProForm 290 Csr Bike English Manual - Page 7

Tip: Do not damage the Wire Harnesses 42 - games

Get ProForm 290 Csr Bike PDF manuals and user guides View all ProForm 290 Csr Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

3. While another person holds the Upright (2) near the Frame (1), locate the wire tie inside the Upright. See the inset drawing. Tie the lower end of the wire tie to the ends of the Game/Pulse and Main Wire Harnesses (42, 43). Then, pull the other end of the wire tie upward until the Wire Harnesses are routed completely through the Upright (2). Tip: Do not pinch the Wire Harnesses (42, 43). Attach the Upright (2) to the Frame (1) with an M10 x 63mm Bolt Set (62). 3 43 42 2 62 Wire Tie 42, 43 1 62 Avoid pinching the Wire Harnesses (42, 43) 4. Identify the Right and Left Handlebars (59, 60), 4 which are marked with "Right" and "Left" stickers. Tip: Do not damage the Wire Harnesses (42, 43). Attach the Handlebars (59, 60) to the Upright (2) with two M8 x 53mm Button Bolts (72) and two M8 Jam Locknuts (89). 60 89 Avoid damaging the Wire Harnesses (42, 43) 43 42 2 59 72 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
7
3
2
Avoid
pinching
the Wire
Harnesses
(42, 43)
1
3.
While another person holds the Upright (2) near
the Frame (1), locate the wire tie inside the
Upright.
See the inset drawing.
Tie the lower end of
the wire tie to the ends of the Game/Pulse and
Main Wire Harnesses (42, 43). Then, pull the
other end of the wire tie upward until the Wire
Harnesses are routed completely through the
Upright (2).
Tip: Do not pinch the Wire Harnesses (42,
43).
Attach the Upright (2) to the Frame (1) with
an M10 x 63mm Bolt Set (62).
62
42
62
42, 43
43
Wire Tie
4.
Identify the Right and Left Handlebars (59, 60),
which are marked with “Right” and “Left” stickers.
Tip: Do not damage the Wire Harnesses (42,
43).
Attach the Handlebars (59, 60) to the
Upright (2) with two M8 x 53mm Button Bolts
(72) and two M8 Jam Locknuts (89).
4
59
2
60
89
72
42
43
Avoid damaging
the Wire Harnesses
(42, 43)