ProForm 325 Cse Elliptical Uk Manual - Page 10
Upright 2 and to the Rear Upright Cover 75
View all ProForm 325 Cse Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
9. Insert the excess wire into the Upright (2) or into the Console (23). 9 Press the Rear Upright Cover (75) into the Upright (2). Have a second person hold the Rear Upright Cover in place. 23 Tip: Avoid pinching the wires. Attach the Console (23) to the Upright (2) with four M4 x 16mm Screws (52); start all the Screws, and then tighten them. Avoid pinching the wires 2 75 52 10. Finish attaching the Left and Right Handlebars (85, 86) to the Upright (2) with an M8 x 77mm 10 Bolt (79) and an M8 Jam Nut (38). Tip: While inserting the M8 x 77mm Bolt (79), avoid pinching or damaging the wires inside the Upright (2). See step 6. Tighten the M8 x 77mm Bolt (79). 11. Attach the Front Upright Cover (81) to the Upright (2) and to the Rear Upright Cover (75) 11 with two M4 x 16mm Screws (52). Avoid pinching the wires 38 85 2 79 86 81 52 75 2 10